1. You need 1 broadband or Streamyx(MAXIS,CELCOM,DIGI,etc..)
Make sure the broadband have connected
2. Right click the connection which you use to connect to the Internet and select Properties. Go to Advanced tab and check “Allow other network users to connect through this computer’s Internet connection”
3. Click the drop down menu and select “Wireless Network Connection“. Click OK.
3. Go back to Network Connections, right click Wireless Network Connection and select Properties.
4. Go to Wireless Networks tab.
5. Click Advanced button, select Computer-to-computer (ad hoc) networks only, and make sure that Automatically connect to non-preferred networks is UNCHECK. Close it.
6. Click Add button and Wireless network properties Window will appear. Enter any Network name (SSID), and change Data encryption to Disabled. You can change it to WEP when everything is working fine.
6. Click Add button and Wireless network properties Window will appear. Enter any Network name (SSID), and change Data encryption to Disabled. You can change it to WEP when everything is working fine.
The HOST configuration is done. From what I read on most guide, step 6 above is not necessary but don’t know why if I don’t do that, the CLIENT won’t see the HOST in the wireless network list.
Next, we’ll need to configure the client computer now which is very simple. CLIENT computer means the laptop or desktop that will be connecting to the HOST computer.
1. Right click tray wireless adapter icon from system tray, and select “View Available Wireless Networks”. Select the HOST computer
and click Connect.
Makesure Internet Connection Sharing is enabled. It might take a while, so be patient.
Done.
0 comments:
Post a Comment